Cornetas 6.5 Infinity 270w 609CS Expand

Cornetas 6.5 Infinity 270w 609CS

INFINITY INFINITY

609CS

Nuevo

  • Refer the user manual below for troubleshooting
  • Plus One (patent pending) woven-glass-fiber woofer cone Edge-driven MMD-dome tweeter Outboard passive crossover with air core inductors
  • Tweeters handle down to 2,500 Hz
  • Low-frequency output
  • The Plus One design
  • 6-1/2-Inch woofers with responsive woven glass-fiber
  • Longer voice coils add some punch to the bass

Más detalles

Entrega estimada en 4 días hábiles

Protección al comprador
¿Necesitas ayuda? (0241) 8253606

Product Description

The Kappa 60.9cs component speaker system features 6-1/2"" woofers with responsive woven glass-fiber cones that won't flex during a hard workout. The Plus One design offers a larger surface area for improved low-frequency output and efficiency, while longer voice coils add a little more punch to the bass. Large magnets keep the woofers running cooler by placing more steel close to the voice coils to act as a heat sink.



Infinity uses the same textile dome tweeters found in many of their popular home speakers with this Kappa system, so you'll hear the music the way it was recorded with minimal coloration or distortion. The tweeters handle down to 2,500 Hz, almost an octave below the tweeters in many systems, so you'll hear more definition and detail, no matter where you sit. Infinity includes mounting hardware to install the tweeters in custom or factory openings.



The computer-optimized outboard crossover networks employ audiophile-grade components to separate highs and lows, so that the woofer and tweeter work together perfectly. You can attenuate tweeter response by 6 dB to get the perfect sonic balance if you've mounted the tweeters in a less-than-ideal factory location.



Pre-wired crossovers eliminate a time-consuming step in your installation, and terminals at the end of the crossover wires screw directly to the Kappa woofers and tweeters, leaving no chance for incorrect wiring.

From the Manufacturer

B0017LFSXU.Infinity_Logo.jpg
B0017LFSXU.Kappa_60.9cs_GRP_SML.jpg

Kappa 60.9cs

Components that bring your car’s sound system to life.

Looking for a more moving audio experience? Take Infinity car audio for a ride. Innovative materials and breakthrough engineering have always put Infinity products out in front of the competition’s. So expect extreme output from us. But be prepared for accuracy and detail that may surprise you. The Kappa line of premium loudspeakers – which incorporates the very best in high-end design and proven technology – has long been one of the world’s most recognized and admired.

Kappa 60.9cs - At a Glance:

  • Plus One woofer cones
  • Woven glass fiber woofer cone material
  • Ultra-wideband UHF soft-dome tweeters
  • Ultrahigh-frequency response (up to 35kHz)
  • True Four Ohm Impedance
  • Computer-optimized voice-matched outboard passive
  • Adjustable, push-button tweeter level control
  • I-Mount tweeter-mounting hardware
  • Starfish Tweeter OEM Mounting Adapter
B0017LFSXU.Kappa_60.9cs_SIDE_SML.jpg

Key Features

Plus One woofer cones

The Plus One cone on the Kappa series provides more overall speaker-cone area than others in its class. With an effective increase in cone area, the speaker radiates more air. Also, the woven glass fiber woofer cone material produces a lighter and stiffer cone. The result is a better low-frequency response and a greater ability to make those important nearly tangible musical notes that people often associate with a larger speaker size.

Woven glass fiber woofer cones

Woven glass fiber woofer cone material is both extremely stiff and very light. This minimizes cone flex while allowing the cone to react quickly which yields very low distortion, improved clarity and deep low frequency response; all Infinity trademarks.

Ultra-wideband UHF soft-dome tweeters

The ultra-wideband UHF tweeter used on the 60.9cs delivers improved vocals, smooth high-frequency response and accurate music reproduction all the way out to 35kHZ.

B0017LFSXU.Kappa_60.9cs_HERO_SML.jpg
Ultrahigh-frequency response (up to 35kHz)

A wide frequency response that extends to 35kHz helps compensate for speaker placement variations in the car and human hearing deficiencies in the high-frequency spectrum above 15kHz. The result is that the Infinity Kappa 60.9cs component speakers deliver more of the full-range frequency response that you associate with great sound.

True Four Ohm Impedance

All Kappa speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance “seen” by the amplifier or head unit. The impedance of Kappa Speakers has been adjusted to compensate for this increase and provides more output than factory speakers or others in its class.

Computer-optimized voice-matched outboard passive crossovers

Each Kappa multielement and component system features an outboard crossover that has been voice-matched for flawless performance. They feature only the best parts including including low-hysteresis polypropylene capacitors, low-loss air-core inductors and high-quality resistors. The result is high-performance sound with incomparable clarity, detail and accuracy.

Adjustable, push-button tweeter level control

The Infinity Kappa 60.9cs component speakers feature 0-decibel and -6 decibel settings to custom-tune higher frequencies. Custom tuning allows users to optimize the sound for different in-vehicle locations. You can easily adjust the tuning by pushing a button on the passive crossover.

I-Mount tweeter-mounting hardware

The Infinity Kappa 60.9cs component tweeter includes the I-Mount (U.S. patent number 5,859,917) tweeter-mounting system, which allows easy flush mounting or surface mounting, giving you more installation options.

Starfish Tweeter OEM Mounting Adapter

The 60.9CS component system comes with the Infinity’s patented Starfish tweeter mounting adapter. This adapter allows for easy installation of the tweeter behind factory grilles. It also provides six break-off mounting tabs to accommodate many mounting configurations. The result is easy, straightforward installation in nearly any vehicle.

No hay reseñas de clientes en este momento.

Escriba una reseña

Cornetas 6.5 Infinity 270w 609CS

Cornetas 6.5 Infinity 270w 609CS

  • Refer the user manual below for troubleshooting
  • Plus One (patent pending) woven-glass-fiber woofer cone Edge-driven MMD-dome tweeter Outboard passive crossover with air core inductors
  • Tweeters handle down to 2,500 Hz
  • Low-frequency output
  • The Plus One design
  • 6-1/2-Inch woofers with responsive woven glass-fiber
  • Longer voice coils add some punch to the bass
Power Handling (RMS)90W
Power Handling (Peak)270W
Frequency Response45Hz – 25kHz
Nominal Impedance2 Ohm
Sensitivity (2.83V @1m)95dB
Mounting Depth (Metric, English)2-7/16"
Power Handling (RMS)90W
Power Handling (Peak)270W
Frequency Response45Hz – 25kHz
Nominal Impedance2 Ohm
Sensitivity (2.83V @1m)95dB
Mounting Depth (Metric, English)2-7/16"